FASCIA PANEL 80MM SUIT AUPL-SH90XL
Item No.
010355
FASCIA PANEL 80MM SUIT PLATINUM 900mm SLIDE-OUT RANGEHOOD -AUPL-SH90XL Instructions: 1. Remove the filter. 2. Remove the front sealing tape to expose the front vents. Do not remove the top 120mm outlet cover. 3 .Replace front rail with 80mm front rail, sold separately 4. Make sure that the internal
Description
FASCIA PANEL 80MM SUIT PLATINUM 900mm SLIDE-OUT RANGEHOOD -AUPL-SH90XL
Instructions:
1. Remove the filter.
2. Remove the front sealing tape to expose the front vents. Do not remove the top 120mm outlet cover.
3 .Replace front rail with 80mm front rail, sold separately
4. Make sure that the internal switch is in recirculating position. (see above)
5. Drill 4 fixing holes as per the drawing. Ensure that access has been allowed for the power cable and plug.
6. Hold the hood up to the underside of the cabinet; align the 4 holes in the cabinet with the corresponding holes in the hood. Screw the 4 screws from the cabinet side.
7. Install carbon filters, sold separately.
8. Re-install filter.
9. Plug in the power to the unit, turn on and test.
*80mm panel and carbon filters are available for purchase when recirulating the unit.
Instructions:
1. Remove the filter.
2. Remove the front sealing tape to expose the front vents. Do not remove the top 120mm outlet cover.
3 .Replace front rail with 80mm front rail, sold separately
4. Make sure that the internal switch is in recirculating position. (see above)
5. Drill 4 fixing holes as per the drawing. Ensure that access has been allowed for the power cable and plug.
6. Hold the hood up to the underside of the cabinet; align the 4 holes in the cabinet with the corresponding holes in the hood. Screw the 4 screws from the cabinet side.
7. Install carbon filters, sold separately.
8. Re-install filter.
9. Plug in the power to the unit, turn on and test.
*80mm panel and carbon filters are available for purchase when recirulating the unit.
Reviews (0)
There are no reviews yet.