EVOSTONE COOKTOP INSTALL KIT
Item No.
160599
EVOSTONE COOKTOP INSTALLATION KIT - 3 METRES Cooktops cut-outs must have the heat-reflective kit to be installed. Allow 5mm extra width and depth for the kit. Measure the total length of the cut-out edge and trim foil to suit. Place the adhesive side up and remove the adhesive protection and stick
Description
EVOSTONE COOKTOP INSTALLATION KIT - 3 METRES
Cooktops cut-outs must have the heat-reflective kit to be installed. Allow 5mm extra width and depth for the kit. Measure the total length of the cut-out edge and trim foil to suit. Place the adhesive side up and remove the adhesive protection and stick the fiberglass felt leaving a 10mm strip of foil adhesive. Starting at the centre of the wall side of the cooktop cut-out, fold and stick the 10mm foil strip wrapping it over the topside of the cut-out 4mm. Allow the foil to hang down in the cupboard.
Download the Evostone Technical Manual
Cooktops cut-outs must have the heat-reflective kit to be installed. Allow 5mm extra width and depth for the kit. Measure the total length of the cut-out edge and trim foil to suit. Place the adhesive side up and remove the adhesive protection and stick the fiberglass felt leaving a 10mm strip of foil adhesive. Starting at the centre of the wall side of the cooktop cut-out, fold and stick the 10mm foil strip wrapping it over the topside of the cut-out 4mm. Allow the foil to hang down in the cupboard.
Download the Evostone Technical Manual
Reviews (0)
There are no reviews yet.